The Vortex flow meter is perfectly suited for measuring flow and consumption of inert gases and steam in both clean or dirty gas environments. With no moving parts, these sensors are both durable and easy to maintain.
The design of this meter allows for precise measurements of most gases and steam no matter how heavily contaminated. With built-in pressure and temperature sensors, all parameters of your gas or steam system are monitored in one unit, saving you install and maintenance costs. The integrated display allows installers to set the flow meter without any additional equipment and for users to read the information in real time right at the meter.
Pipe sections are available from DN15 to DN300.
Features of Vortex Flow Meters
- Inline type sensor
- Measurement range: 1.5 to 300 Nm/s (5 to 931 ft/sec)
- Integrated 2” touch screen display
- Measures flow, pressure, and temperature
- Ultra-high sensitivity dual vortex probe
- Turndown ratio of 1:53 goes beyond traditional Vortex flowmeters
- Full digital signal processing for higher precision and better stability
- Accuracy of ±1.5% reading, ±0.3% full scale (high accuracy of +/-1% reading, +/-0.3% full scale, available upon request)
- Integrated pressure and temperature sensors
- No moving parts
- Suitable for pipes from DN15 – DN300 provided minimum velocity is maintained
- Modbus RTU and 4 to 20 mA + Pulse outputs
- 12 month warranty
- Full electrical isolation to filter out disturbances
- Stable signals
- Vibration resistant
- All-welded construction for corrosion resistance, high pressure and high temperature resistance
Vortex Flow Meter comes with
- Calibration certificate
- User Manual
- 12 month warranty
Vortex Flow Meter Options
- Pressure: 1.6 MPa (16 bar) or 6.3 MPa (63 bar)
- Pipe Section: DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300
- Medium: Gas or Steam
- Gas Types: Air, Argon, Carbon Dioxide, Carbon Monoxide, Helium, Hydrogen, Natural Gas, Nitrogen, Nitrous Oxide, Oxygen
Contact us for other pipe section sizes.
Important
- Incorrect wiring or installation can give false readings, damage the sensor and void the warranty. If you aren’t sure how to install or wire the sensor, please contact us. Full installation and wiring instructions are available in the User Manual.
Warranty
12 month warranty
Technical Documents
Other Information
Please refer to our Terms and Conditions of Sale.
