Flow Meter Enclosure

Related products

• 

  Select options

  Flow Meter

  Inline Flow Meter

  AUD $1,119 – AUD $1,610

  Inline type, thermal mass flow meter. Flange (DIN) or R-Thread pipe connection. Suitable for pipe sections from DN15 to DN80.

  Flow Range
  0.1 to 250 Nm/sec (0.3 to 820 ft/sec)

  Gas Pressure Range
  up to 40 bar (600 psi)

  Gas Quality
  Clean and dry compressed air and inert gases

  Pipe Sizes
  DN15 to DN80

  Pipe Connection
  Flange or R-Thread

  Accuracy
  Flow: ±1.5% reading, ±0.3% full scale
  (high accuracy ±1% reading, ±0.3% full scale available on request)

  Output
  Modbus (RS485) and 4-20mA

  Measure
  Flow, Mass Flow, Consumption and Temperature

  Power Requirement
  18 to 30VDC / 5W@24VDC

  Bi-directional
  No

  Measurement Principal
  Mass Flow

  Application
  Manufacturing and industrial use
  Temporary or permanent installation

  Accessories
  The transparent Flow Meter Enclosure will protect the flow meter head from liquids and other damage
  Extra M12 connectors and data cables are available on the Accessories page

  Select options
• 

  Select options

  Flow Meter

  Pitot Tube Flow Meter

  AUD $3,502 – AUD $4,530

  Pitot Tube flow meter. Ideally suited to wet, dirty and high velocity compressed air and inert gas systems that contain some level of contamination.

  Flow Range
  5 – 300 Nm/s (17 to 984 ft/s)

  Gas Pressure Range
  up to 17 bar (247 psi)

  Gas Quality
  Wet, dirty and high velocity compressed air and inert gas systems

  Pipe Sizes
  DN25 to DN600

  Accuracy
  Flow: ±1.5% reading, ±0.3% full scale
  Pressure: ±0.5% full scale

  Output
  Modbus (RS485) and 4-20mA

  Measure
  Flow, Consumption, Pressure, Temperature

  Power Requirement
  18 to 30VDC / 6.5W@24VDC

  Bi-directional
  Optional

  Measurement Principal
  Volumetric

  Application
  Manufacturing and industrial use
  Temporary or permanent installation

  Accessories
  Our Flow Meters have BSP thread. If your fittings are NPT thread, you will need a BSP to NPT adapter
  The transparent Flow Meter Enclosure will protect the flow meter head from liquids and other damage
  Extra M12 connectors and data cables are available on the Accessories page

  Select options
• 

  Select options

  Accessories

  M12 Connector

  AUD $15 – AUD $42

  M12 connectors for compressed air (pneumatic) systems. Straight, 5 Pin, plastic connector. IP67.

  Perfect for connecting sensors to Modbus or 4-20mA cables and 24vDC power.

  The Y and Tee connectors are ideally suited to daisy chaining sensors together.

   

  Select options