Menu Close
Monitoring Login
Cart/USD $0 0

Cart

United States dollar ($) - USD
  • Australian dollar ($) - AUD
  • United States dollar ($) - USD
  • Euro (€) - EUR
  • Canadian dollar ($) - CAD
  • Pound sterling (£) - GBP
  • Singapore dollar ($) - SGD

Distributors

Monitoring Login
Cart/USD $0 0

Cart

1/2" BSP to NPT adapter

BSP to NPT Adapter

24vDC Power Supply with M12 connector Portable dew point sensor

USD $21

Stainless Steel (304SS) 1/2″ BSP to NPT adapter.

1/2″ BSP female to 1/2″ NPT male thread.

Perfect for use with Compressed Air Alliance’s flow meters.

United States dollar ($) - USD
  • Australian dollar ($) - AUD
  • United States dollar ($) - USD
  • Euro (€) - EUR
  • Canadian dollar ($) - CAD
  • Pound sterling (£) - GBP
  • Singapore dollar ($) - SGD
SKU: ACC000304 Categories: , Tags: , ,

Stainless Steel (304SS) 1/2″ BSP to NPT adapter.

1/2″ BSP female to 1/2″ NPT male thread.

Allows easy change between BSP and NPT thread standards.

Perfect for use with Compressed Air Alliance’s flow meters.

Weight 0.5 kg
Dimensions 5 × 5 × 5 cm

Related products

  • Inline Thermal Mass flow meter with flange connectionHighlights of the thermal mass inline flow meter

    Inline Flow Meter

    USD $1,288 – USD $1,776

    Inline type, thermal mass flow meter. Flange (DIN) or R-Thread pipe connection. Suitable for pipe sections from DN15 to DN80.

    Flow Range
    0.1 to 250 Nm/sec (0.3 to 820 ft/sec)

    Gas Pressure Range
    up to 40 bar (600 psi)

    Gas Quality
    Clean and dry compressed air and inert gases

    Pipe Sizes
    DN15 to DN80

    Pipe Connection
    Flange or R-Thread

    Accuracy
    Flow: ±1.5% reading, ±0.3% full scale
    (high accuracy ±1% reading, ±0.3% full scale available on request)

    Output
    Modbus (RS485) and 4-20mA

    Measure
    Flow, Mass Flow, Consumption and Temperature

    Power Requirement
    18 to 30VDC / 5W@24VDC

    Bi-directional
    No

    Measurement Principal
    Mass Flow

    Application
    Manufacturing and industrial use
    Temporary or permanent installation

    Accessories
    The transparent Flow Meter Enclosure will protect the flow meter head from liquids and other damage
    Extra M12 connectors and data cables are available on the Accessories page

    Select options
  • Hot Tap ClampHot Tap Clamp - Kit

    Hot Tap Clamps

    USD $359 – USD $592

    Compressed Air Alliance’s Hot Tap Clamps are idea for use when a take off or socket needs to be added to the pipework while under pressure. Each set comes with a clamp and a ball valve. The clamps are easy to install around the pipe and form a tight seal.

    Clamp Sizes
    To suit pipe ODs from 45 mm (1.8”) to 240 mm (9.4”)

    Ball Valve Size
    1/2” valve or 3/4” valve

    Working Gas Pressure Range
    Up to 1.6 MPa (16 bar, 232 psi)

    Working Temperature
    0°C to 60°C (+32°F to +140°F)

    Clamp Material
    Clamp shell, nuts and washers are made from 316 stainless steel
    Gasket is made from Nitrile rubber

    Application
    Manufacturing and industrial use
    Temporary or permanent installation

    Select options
  • Cables for 24vDC power, 4-20mA signals and Modbus RS485 communicationM12 and M8 pins

    Cables

    USD $21 – USD $42

    5 wire sensor / instrument / data cables. Perfect for connecting pneumatic sensors to 24vDC power, Modbus output, 4-20mA output, displays, SCADA systems and more.

    These cables can be used with Compressed Air Alliance’s: Data Acquisition System, Dew Point Sensors, Flow Meter, Pressure Sensors, Power Meters and Temperature Sensors.

    Extra M12 connectors and data cables are available on the Accessories page

    Select options