Compressed Air Alliance

Sensors to measure and monitor utilities on manufacturing / industrial sites

Showing all 12 results

Flow Meter - Gas and Steam
Vortex Flow Meter
EUR €1,907 – EUR €8,360

The Vortex flow meter is perfectly suited for measuring the flow, pressure and temperature of gases and steam. Ideal for use in steam, wet gas and on the outlet of compressors.

Flow Range: 1.5 to 300 Nm/sec (5 to 931 ft/sec)

Pipe Sizes: DN15 to DN300

Accuracy: ±1.5% reading, ±0.3% full scale

Output: Modbus (RS485) and 4-20mA

Power Requirement: 18 to 30VDC / 10W@24V

Application
• Manufacturing and industrial use
• Temporary or permanent installation

Select options
Flow Meter - Liquids
Ultrasonic Flow Meter – Clamp-on
EUR €1,607 – EUR €3,466
Ultrasonic flow meter for industrial and domestic water, sea water, heating and cooling water, diesel oil, alcohol or other clean liquids with minimal bubbles or solids. Measure real-time flow, accumulated flow, flow velocity and pipe temperature. Ideal for temporary or permanent installation.

Liquid Flow Range: 0.1m/s to 5m/s (0.328ft/s to 16ft/s)

Pipe Sizes: DN6 to DN100

Output: Modbus (RS485) and 4-20mA

Power Requirement: 24vDC

Application
Manufacturing and industrial use
Non-explosive environments

Select options
Dew Point Sensor
Portable Dew Point Sensor
EUR €1,927 – EUR €2,698
Handheld / portable dew point sensor for compressed air and gases. Ideal for service technicians, auditors and temporary measurements.

Pressure Dew Point (PDP) Range
-60°C to +60°C (-76°F to +140°F) or
-110°C to +60°C (-166°F to +140°F)

Gas Pressure Range: up to 17 bar (246 psi)

Dryer Types: Desiccant, membrane, drum, refrigerant or hybrid dryers

Gas Quality: Minimal contaminates (ie minimal oil, particles or water vapour)

Application
• Manufacturing and industrial use
• Non-explosive environments

Select options
Flow Meter - Gas and Steam
Thermal Mass Flow Meter (Outdoor) – IP67
EUR €2,257 – EUR €2,654
Outdoor thermal mass flow meter suitable for clean, dry gas. Ideal for harsh environments or outdoor installations. Measure flow, mass flow, consumption and gas temperature.

Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)

IP Rating: IP67

Pipe Sizes: DN20 to DN300

Accuracy: ±1.5% reading, ±0.3% full scale

Output: Modbus (RS485) and 4-20mA

Power Requirement: 18 to 30VDC / 5W@24VDC

Application
• Manufacturing and industrial use
• Temporary or permanent installation

Select options
Flow Meter - Gas and Steam
Thermal Mass Flow Meter (Indoor)
EUR €1,892 – EUR €2,253
Insertion type, thermal mass flow sensor for clean, dry gas. Good option where shutting down the system is difficult or impossible. Measure flow, mass flow, consumption and gas temperature.

Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)

Pipe Sizes: DN20 to DN600

Accuracy: ±1.5% reading, ±0.3% full scale

Output: Modbus (RS485) and 4-20mA

Power Requirement: 18 to 30VDC / 5W@24VDC

Application
• Manufacturing and industrial use
• Temporary or permanent installation

Select options
Dew Point Sensor
Outdoor Dew Point Sensor – IP67
EUR €1,689 – EUR €2,085
The outdoor dew point sensor has an IP67 rating. Suitable for compressed air and gases. Ideal for temporary or permanent installation.

Pressure Dew Point (PDP) Range
-60°C to +60°C (-76°F to +140°F) or
-110°C to +20°C (-166°F to +68°F)

Dryer Types: Desiccant, Membrane, drum, refrigerant or hybrid dryers

Outputs: Modbus RTU (RS485) and 4-20mA

Power Requirement: 16 to 30vDC

Application
• Manufacturing and industrial use
• Non-explosive environments

Select options
Dew Point Sensor
Wall-mount Dew Point Monitor
EUR €995 – EUR €1,777
Wall mount dew point monitor with touch screen display and alarm. Measure pressure dew point (PDP), relative humidity, temperature and pressure (if using the optional integrated pressure sensor). Ideal for temporary or permanent installation.

Pressure Dew Point (PDP) Range
-60°C to +60°C (-76°F to +140°F)
-80°C to +20°C (-112°F to +68°C)
-110°C to +20°C (-166°F to +68°F)

Dryer Types: Refrigerant, desiccant, drum or membrane dryers

Output: 4-20mA and alarm relay

Power Requirement: Standard wall socket, 110-240vAC

Application
• Manufacturing and industrial use
• Non-explosive environments

Select options
Flow Meter - Gas and Steam
Inline Flow Meter (Indoor)
EUR €1,224 – EUR €1,687
Inline type, thermal mass flow sensor for clean, dry gas. Flange (DIN) or R-Thread pipe connection. Measure flow, mass flow, consumption and gas temperature.

Flow Range: 0.1 to 250 Nm/sec (0.3 to 820 ft/sec)

Pipe Sizes: DN15 to DN80

Pipe Connection: Flange or R-Thread

Accuracy: ±1.5% reading, ±0.3% full scale

Output: Modbus (RS485) and 4-20mA

Power Requirement: 18 to 30VDC / 5W@24VDC

Application
• Manufacturing and industrial use
• Temporary or permanent installation

Select options
A Series
Dew Point Sensor for Desiccant or Membrane Dryers and Nitrogen
EUR €940 – EUR €1,622
Dew point transmitter with Alumina-Oxide sensor for compressed air, inert gases and nitrogen systems. Ideal for temporary or permanent installation.

Pressure Dew Point (PDP) Range
-80°C to +20°C (-112°F to +68°F)
-110°C to +20°C (-166°F to +68°F)

Dryer Types: Nitrogen, gas or compressed air systems with desiccant, membrane, drum or hybrid dryers.

Outputs: Modbus (RS485) and 4-20mA

Power Requirement: 10 to 30vDC, max 50 mA @ 24vDC

Application
• Manufacturing and industrial use
• Non-explosive environments

Select options
Dew Point Sensor
Dew Point Sensor for Refrigerant and Membrane dryers
EUR €590 – EUR €1,092
Dew point sensor with polymer technology for compressed air and gases. Ideal for temporary or permanent installation.

Pressure Dew Point (PDP) Range: -60°C to +60°C (-76°F to +140°F)

Dryer Types: Refrigerant, Membrane, Drum or Hybrid dryers

Outputs: Modbus (RS485) and 4-20mA

Power requirement: 10 to 30vDC, max 50 mA @ 24vDC

Application
• Manufacturing and industrial use
• Non-explosive environments

Select options
Flow Meter - Gas and Steam
Mini Flow Meter for Point of Use
EUR €519 – EUR €1,030
Mini flow sensor, ideal for low flow, small pipes and point of use measurements. Measure instantaneous flow and cumulative flow

Pipe Sizes: DN3 to DN40

Pipe Connection: NPT or G thread

Accuracy: ±1.5% reading, ±0.3% full scale

Output: Modbus (RS485) and 4-20mA

Power Requirement: 24VDC

Application
• Manufacturing and industrial use
• Temporary or permanent installation

Select options
Dew Point Sensor
Mini Dew Point Sensor for Refrigerant and Membrane dryers
EUR €529 – EUR €578
This economical, mini dew point sensor is suited to small spaces. Measure pressure dew point (PDP), relative humidity, temperature. Ideal for temporary or permanent installation.

Pressure Dew Point (PDP) Range: -60°C to +60°C (-76°F to +140°F)

Dryer Types: Refrigerant, Drum or Membrane Dryers

Outputs: Modbus (RS485) and 4-20mA

Power Requirement: 10 to 30vDC, max 50 mA @ 24vDC

Application
• Manufacturing and industrial use
• Non-explosive environments

Select options