Power Monitoring

• 

  Din Rail with Display

  Power Meter – Din Rail with Display

  USD $256 – USD $288

  This three-phase power meter with Modbus/RTU output is simple to install and easy to configure directly through the built in display and can be connected to your data acquisition system for long term monitoring. Use on mains supply or to sub meter individual equipment or sub loads. Measure voltage, amps, frequency, kilowatts, kilowatt hours, power factor, reactive power, apparent power and harmonics.

  Measured Voltage: 0~600 VAC

  Mounting: Din Rail

  Output: Modbus RS485

  Comes with 3 Rogowski Coils.  Choose from 500 amps, 1,000 amps or 3,000 amps

  Power requirement: 24 VDC, 45- 60 Hz

  Application
  Manufacturing and industrial use
  Non-explosive environments

  Select options
• 

  Coil with 4-20mA output

  Rogowski Coils with Integrator

  USD $180 – USD $244

  Current clamps provide an effective energy measurement solution when your budget is limited. Rogowski Coils have a large flexible coil and provide an excellent solution where a traditional current clamp is too difficult to fit. The inline integrator amplifies and converts the coil’s output to a 4-20mA or Modbus (RS485) standard signal for simple connection to your PLC or display.

  Type
  Single phase, current clamp

  Output Signals
  4 to 20mA or Modbus (RS485)
  Amps

  Accuracy
  ±1%

  Display
  No Display

  Rogowski Coils options
  Comes with 1 rogowski coil
  Options: 500 amps, 1,000 amps or 3,000 amps

  Power requirement
  24vDC, 100mW

  Application
  Single phase measurements
  Manufacturing and industrial use
  Temporary or permanent installation

  Select options
• 

  Panel Mount

  Power Meter – Panel Mount with Display

  USD $105

  This single or three-phase, panel mount power meter is ideal for installation on main or sub-distribution boards where readings need to be accessed without opening the panel. Use on mains supply or to sub meter individual equipment or sub loads. Measure Voltage, amps, frequency, kilowatts, kilowatt hours, power factor, real power, reactive power, apparent power and harmonics.

  Measured Voltage and Frequency: 0~600 VAC Phase Voltage

  Mounting: Panel Mount

  Output: Modbus RS485

  Comes with 3 Rogowski Coils.  Choose from 500 amps, 1,000 amps or 3,000 amps

  Power requirement: 18-36vDC, 45- 60 Hz

  Application
  Manufacturing and industrial use
  Non-explosive environments

  Select options