Menu Close

Hot Tapping Tool

Showing all 2 results

  • USD $1,341USD $2,437

    A hot tap drill is a universal tool that allows you to manually install a connection point on pressurized or unpressurised pipes. Note: Hot tapping can be dangerous and should be performed by experienced technicians only.

    Drill Depth
    Up to 200 mm (7.87”)

    Drill bit Diameters
    8.5 mm, 14.5 mm, 19.5 mm, 24.5 mm
    Corresponding ball valve size: 1/4”, 1/2”, 3/4”, 1”

    Drill Bit Material
    Cobalt-containing high-performance high-speed steel HSS / E

    Working Gas Pressure Range
    Up to 20 bar (290 psi)

    Working Temperature
    -50°C to +200°C (-58°F to +392°F)

    Application
    Manufacturing and industrial use
    Temporary or permanent installation

  • USD $211USD $283

    Compressed Air Alliance’s Hot Tap Clamps are idea for use when a take off or socket needs to be added to the pipework while under pressure. Each set comes with a clamp and a ball valve. The clamps are easy to install around the pipe and form a tight seal.

    Clamp Sizes
    To suit pipe ODs from 45 mm (1.8”) to 240 mm (9.4”)

    Ball Valve Size
    1/2” valve or 3/4” valve

    Working Gas Pressure Range
    Up to 1.6 MPa (16 bar, 232 psi)

    Working Temperature
    0°C to 60°C (+32°F to +140°F)

    Clamp Material
    Clamp shell, nuts and washers are made from 316 stainless steel
    Gasket is made from Nitrile rubber

    Application
    Manufacturing and industrial use
    Temporary or permanent installation