Insertion Flow Meter
Showing all 2 results
Showing all 2 results
Pitot Tube flow meter. Ideally suited to wet, dirty and high velocity compressed air and inert gas systems that contain some level of contamination.
Flow Range
5 – 300 Nm/s (17 to 984 ft/s)
Gas Pressure Range
up to 17 bar (247 psi)
Gas Quality
Wet, dirty and high velocity compressed air and inert gas systems
Pipe Sizes
DN25 to DN600
Accuracy
Flow: ±1.5% reading, ±0.3% full scale
Pressure: ±0.5% full scale
Output
Modbus (RS485) and 4-20mA
Measure
Flow, Consumption, Pressure, Temperature
Power Requirement
18 to 30VDC / 6.5W@24VDC
Bi-directional
Optional
Measurement Principal
Volumetric
Application
Manufacturing and industrial use
Temporary or permanent installation
Accessories
Our Flow Meters have BSP thread. If your fittings are NPT thread, you will need a BSP to NPT adapter
The transparent Flow Meter Enclosure will protect the flow meter head from liquids and other damage
Extra M12 connectors and data cables are available on the Accessories page
Insertion type, thermal mass flow sensors. Good option where shutting down the system is difficult or impossible
Flow Range
0.1 to 250 Nm/s (0.3 to 820 ft/sec)
Gas Pressure Range
up to 50 bar (725 psi)
Gas Quality
Clean and dry compressed air and inert gases
Pipe Sizes
DN20 to DN600
Accuracy
Flow: ±1.5% reading, ±0.3% full scale
(high accuracy ±1% reading, ±0.3% full scale available on request)
Output
Modbus (RS485) and 4-20mA
Measure
Flow, Mass Flow, Consumption, Temperature
Power Requirement
18 to 30VDC / 5W@24VDC
Bi-directional
No
Measurement Principal
Mass Flow
Application
Manufacturing and industrial use
Temporary or permanent installation
Accessories
Our Flow Meters have BSP thread. If your fittings are NPT thread, you will need a BSP to NPT adapter
The transparent Flow Meter Enclosure will protect the flow meter head from liquids and other damage
Extra M12 connectors and data cables are available on the Accessories page
