Thermal Mass Flow Meter

• 

  Flow Meter - Gas and Steam

  Thermal Mass Flow Meter (Outdoor) – IP67

  USD $2,376 – USD $2,794

  Outdoor thermal mass flow meter suitable for clean, dry gas. Ideal for harsh environments or outdoor installations. Measure flow, mass flow, consumption and gas temperature.

  Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)

  IP Rating: IP67

  Pipe Sizes: DN20 to DN300

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 18 to 30VDC / 5W@24VDC

  Application
  • Manufacturing and industrial use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Thermal Mass Flow Meter (Indoor)

  USD $1,992 – USD $2,372

  Insertion type, thermal mass flow sensor for clean, dry gas. Good option where shutting down the system is difficult or impossible. Measure flow, mass flow, consumption and gas temperature.

  Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)

  Pipe Sizes: DN20 to DN600

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 18 to 30VDC / 5W@24VDC

  Application
  • Manufacturing and industrial use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Inline Flow Meter (Indoor)

  USD $1,288 – USD $1,776

  Inline type, thermal mass flow sensor for clean, dry gas. Flange (DIN) or R-Thread pipe connection. Measure flow, mass flow, consumption and gas temperature.

  Flow Range: 0.1 to 250 Nm/sec (0.3 to 820 ft/sec)

  Pipe Sizes: DN15 to DN80

  Pipe Connection: Flange or R-Thread

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 18 to 30VDC / 5W@24VDC

  Application
  • Manufacturing and industrial use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Mini Flow Meter for Point of Use

  USD $546 – USD $1,084

  Mini flow sensor, ideal for low flow, small pipes and point of use measurements. Measure instantaneous flow and cumulative flow

  Pipe Sizes: DN3 to DN40

  Pipe Connection: NPT or G thread

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 24VDC

  Application
  • Manufacturing and industrial use
  • Temporary or permanent installation

  Select options