Menu Close

Ultrasonic Flow Meter – Clamp-on

USD $1,692USD $3,648

Ultrasonic flow meter for industrial and domestic water, sea water, heating and cooling water, diesel oil, alcohol or other clean liquids with minimal bubbles or solids. Measure real-time flow, accumulated flow, flow velocity and pipe temperature. Ideal for temporary or permanent installation.

Liquid Flow Range: 0.1m/s to 5m/s (0.328ft/s to 16ft/s)

Pipe Sizes: DN6 to DN100

Output: Modbus (RS485) and 4-20mA

Power Requirement: 24vDC

Application
Manufacturing and industrial use
Non-explosive environments

United States dollar ($) - USD
  • Australian dollar ($) - AUD
  • United States dollar ($) - USD
  • Euro (€) - EUR
  • Canadian dollar ($) - CAD
  • Pound sterling (£) - GBP
  • Singapore dollar ($) - SGD

Compressed Air Alliance’s clamp-on ultrasonic flow meter is specially designed for small to medium sized pipe diameters. Fast and easy to install in less than 3 minutes.

The ultrasonic flow meter sends multiple signals per second which provides accurate flow rate measurements in full pipes. When the ultrasonic signal is transmitted and received through flowing liquid, there will be different upstream and downstream values, which can be used to calculate flow and velocity.

With no moving parts and no pressure loss the flow meter provides long lasting performance. These flow meters are incredibly durable and made for most industrial environments.

Features of the Clamp-on Ultrasonic Flow Meter

Fast, easy installation

Liquid Flow Range

  • 0.1m/s to 5m/s (0.328ft/s to 16ft/s)

Liquid Quality

  • Clean liquids with minimal bubbles or solids

Pipe Sizes

  • DN6 (1/8”) to DN100 (4”)

Pipe materials

  • PVC, Stainless Steel, Carbon Steel, Copper

IP Rating

  • IP54

Accuracy

  • ±2%

Output

  • Modbus (RS485) and
  • 4-20mA

Measure

  • Real-time flow
  • Accumulated flow
  • Flow velocity
  • Pipe temperature

Power Requirement

  • 24vDC

Bi-directional

  • No

Measurement Principal

  • Ultrasonic

Application

  • Manufacturing and industrial use
  • Non-explosive environments
  • Temporary or permanent installation

Clamp-on Ultrasonic Flow Meter Pack

  • 2 meter data cable with M12 connector
  • Calibration certificate
  • User Manual
  • 12 month warranty

Clamp-on Ultrasonic Flow Meter Options

  • Pipe Size: DN6, DN8, DN10, DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80 or DN100

Important

  • The sensor must be installed away from bends, edges, seams, changes in pipe size and other obstructions,
  • Incorrect wiring or installation can give false readings, damage the sensor and void the warranty. If you aren’t sure how to install or wire the sensor, please contact us. Full installation and wiring instructions are available in the User Manual.

Warranty & Calibration

12 month warranty

Calibration is recommended every 2 years.

Technical Documents

Product Flyer

Accessories

Accessories such as mechanical and electrical fittings are available on the Accessories page.

Other Information

Part Numbers: LIM100001, LIM100002, LIM100003, LIM100004, LIM100005, LIM100006, LIM100007, LIM100008, LIM100009, LIM100010, LIM100011, LIM100012

Please refer to our Terms and Conditions of Sale.