Pitot tube flow meters are ideally suited to wet, dirty and high velocity compressed air and gas systems that contain some level of contamination. This makes a pitot tube flow meter ideal for measuring flow, temperature and pressure near the outlet of compressors and other difficult environments.
Pitot tube flow meters have no moving parts, a low pressure drop and are vibration proof. The integrated pressure and temperature sensors give real-time monitoring of fluid pressure and temperature. The sensor has an extremely sensitive differential pressure measurement that allows pitot tube flow meters to be used over a wide flow range, whilst the patented anti-condensation technology ensures the sensor can be used under 100% saturated conditions. The flow meter can be easily installed under pressure through a 1/2″ ball valve.
Innovative online auto-calibration technology compensates for temperature and pressure changes, enabling the pitot tube flow meter to perform stable accurate measurements for years to come.
Best suited to
- Wet and dirty gases
- High velocity gases (5 to 300 Nm/s or 17 to 984 ft/s)
- Note: below minimum velocity flow, the meter read will be zero.
- Permanent or temporary installation
Features of Pitot Tube Flow Meters
- Style: Insertion type sensor (BSP thread)
- Technology: Pitot Tube (Volumetric)
- IP Rating: IP65
- Gas Quality: moist or dirty compressed air and inert gases
- Do not use on compressor outlets. Must have a filter or water separator between the compressor and flow meter
- Pipe Sizes: DN25 – DN600 provided minimum velocity is maintained
- Minimum Flow Velocity: 5 Nm/s
- Note: below minimum velocity flow, the meter read will be zero.
- Flow range of 5 – 300 Nm/s (17 to 984 ft/s)
- Gas Pressure: up to 17 bar (247 psi)
- Gas Temperature: -40 to +150°C (-40 to +302°F)
- Accuracy: +/-1.5% reading, +/-0.3% full scale
- Power Requirement:
- During start up: 18 to 30V DC ⁄ 24W@24V
- Normal operation: 18 to 30VDC / 6.5W@24VDC
- Outputs: Modbus RTU and 4 to 20 mA + Pulse outputs
- Display: 2.8″ ultra-wide viewing angle LCD touch screen
- Data Logging: up to 10,000,000 recording points
- Bi-directional: Optional
- Measure: Flow, Consumption, Pressure, Temperature
- Other Features:
- Integrated pressure and temperature sensors for real-time monitoring of fluid pressure and temperature
- Easy to insert and remove through 1/2″ valve, even when under pressure
- Low pressure drop
- No moving parts, low pressure drop
- Full electrical isolation to filter out disturbances
- Stable signals
- Extremely sensitive differential pressure sensor
- Innovative online auto-calibration function to compensate the temperature and pressure change
- Patented anti condensation technology
- Anti-particulate pollution, oil vapour and most chemicals
- Applications:
- Manufacturing and industrial use
- Temporary or permanent installation
- Indoor use
- Warranty: 12 months
Important
- You need to maintain a minimum flow velocity of 5 Nm/s (17 ft/s) for the pitot tube to work correctly. Below this minimum velocity, the flow meter reading will be zero.
- Flow meters must be installed away from bends, edges, seams, changes in pipe size and other obstructions
- Incorrect wiring or installation can give false readings, damage the sensor and void the warranty. If you aren’t sure how to install or wire the sensor, please contact us. Full installation and wiring instructions are available in the User Manual.
Pitot Tube Flow Meter comes with:
- M12 connector (data cable optional)
- Calibration certificate
- User Manual
- 12 month warranty
Pitot Tube Flow Meter Options
- Two shaft length options: 250 mm (9.8″) or 400 mm (15.7″)
- Multiple gas options: Air, Argon, Carbon Dioxide, Helium, Hydrogen, Natural Gas, Nitrogen, Nitrous Oxide and Oxygen
Warranty & Calibration
12 month warranty
Calibration is recommended every 2 years (provided the sensor is not exposed to relative humidity above 85%).
Annual calibration is required if the sensor is exposed to relative humidity above 85%.
Technical Documents
Accessories
Accessories such as mechanical and electrical fittings are available on the Accessories page.
Other Information
Part Numbers: FLP100001, FLP200001, FLP110001, FLP210001, FLP110011, FLP210011
Please refer to our Terms and Conditions of Sale.