The Vortex flow meter is perfectly suited for measuring flow and consumption of inert gases and steam in both clean or dirty gas environments. With no moving parts, these sensors are both durable and easy to maintain.
The design of this meter allows for precise measurements of most gases and steam no matter how heavily contaminated. With built-in pressure and temperature sensors, all parameters of your gas or steam system are monitored in one unit, saving you install and maintenance costs. The integrated display allows installers to set the flow meter without any additional equipment and for users to read the information in real time right at the meter.
Features of Vortex Flow Meters
- Style: Inline – Flange connection
- Technology: Karman vortex principle (volumetric)
- IP Rating: IP65
- Pipe Sizes: DN15 – DN300 provided minimum velocity is maintained
- Minimum Flow Velocity: 1.5 Nm/s
- Flow Range: 1.5 to 300 Nm/s (5 to 931 ft/sec)
- Gas Parameters:
- Quality: dirty ⁄ wet air and non-corrosive gases
- Pressure: up to 16 bar (232 psi)
- Temperature: -40 to +150°C (-40 to +302°F)
- Steam Parameters:
- Pressure: up to 63 bar (913 psi)
- Temperature: -40 to +280°C (-40 to +536°F)
- Accuracy: +/-1.5% reading, +/-0.3% full scale
- Power Requirement: 18 to 30VDC / 10W@24VDC
- Outputs: Modbus RTU and 4 to 20 mA + Pulse outputs
- Display: 2″ ultra-wide viewing angle LCD touch screen
- Data Logging: No
- Bi-directional: No
- Measure: Flow, gas pressure, and gas temperature
- Other Features:
- Integrated pressure and temperature sensor
- Ultra-high sensitivity dual vortex probe
- Turndown ratio of 1:53 goes beyond traditional Vortex flowmeters
- Full digital signal processing for higher precision and better stability
- No moving parts
- Full electrical isolation to filter out disturbances
- Stable signals
- Vibration resistant
- All-welded construction for corrosion resistance, high pressure and high temperature resistance
- Applications:
- Manufacturing and industrial use
- Temporary or permanent installation
- Compressor outlets
- Warranty: 12 months
Important
- Incorrect wiring or installation can give false readings, damage the sensor and void the warranty. If you aren’t sure how to install or wire the sensor, please contact us. Full installation and wiring instructions are available in the User Manual.
Vortex Flow Meter comes with
- Calibration certificate
- User Manual
- 12 month warranty
Vortex Flow Meter Options
- Pressure: 1.6 MPa (16 bar) or 6.3 MPa (63 bar)
- Pipe Section: DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300
- Medium: Gas or Steam
- Gas Types: Air, Argon, Carbon Dioxide, Carbon Monoxide, Helium, Hydrogen, Natural Gas, Nitrogen, Nitrous Oxide, Oxygen
Contact us for other pipe section sizes.
Warranty
12 month warranty
Technical Documents
Other Information
Please refer to our Terms and Conditions of Sale.